Phosphate remover CTX PhosFree swimming pool

Manuals

Pool Maintenance Manual
Product catalog
Product safety data sheet

CTX PhosFree

• Prevention product.
• Compatible with all types of disinfectants.
• Easy and simple to use.
• Improves the performance of salt electrolysis equipment or salt chlorinators.
• Formulated based on lanthanum.
• Prevents the formation of algae derived from chemical products, garden fertilizers and other pollutants.
• Valid for all types of pools.
• To have a healthy and well-maintained pool, prevention is the best solution.

Dosage and mode of use

A phosphate concentration below 25 ppb (parts per billion) should be maintained to prevent algae formation.

Initial treatment for high phosphate levels:

1. Ensure that the filter is clean and the equipment is operating properly.
2. Pour the required dose of PhosFree into a container of water and spread the solution evenly over the surface of the pool.
3. Keep the filtration system running for at least 24 hours after application.
4. After 48 hours, test the phosphate level of your pool with a phosphate test kit (see test strips in related products).

If necessary, repeat the treatment. (*) 80 ml per week for a 50 m³ pool.

Indicative doses required depending on phosphate levels for a 50 m³ pool:

These doses are for guidance only, and may be modified according to the characteristics of each pool, climate, etc.

The addition of the product should preferably be done at dusk and without the presence of bathers in the pool water.

1 liter container (the liter costs 29,90 €).