Gelacid CTX-52 Gel Descaling Gelacid

Manuals

CTX-52 Gelacid Descaler Technical Data Sheet

Safety Datasheet CTX-52 Gelacid Descaler

CTX Swimming Pool Maintenance Manual

CTX-52 Gelacid Descaler Gelacid

Completely dissolves calcareous deposits and metal oxide stains.

It does not give off fumes or vapors that bother the user.

Easily applied by brush or roller on vertical surfaces, which increases the performance of the product compared to commonly used liquid cleaners.

Due to its consistency, it adheres to the walls, avoiding in cement pools the formation of grooves and wear of material that should be repaired later.

The brush application allows to reach areas where dirt can be more adhered (bends, corners, etc.) without damaging the rest of the previously cleaned surfaces.

Easy to rinse with abundant pressurized water.

Tips for use:

• Empty the pool.
• Moisten the surfaces to be cleaned with water and apply the product directly without dilution using a brush or plastic roller.
• Leave the product to soak for about 1/2 hour, then rinse with plenty of water until neutralization.
• If the incrustation or stains persist locally, attack these affected zones, repeating the previous operation.
• In these zones it is convenient to help the action of the product rubbing with a brush.

The indicative consumption of the product is about 15 lts. for each 100 m3 of volume of the swimming pool, depending on the degree of existing dirt.

Available in containers of:

• Code 08669 - 4 containers of 5 liters (20 liters in total, the liter comes out to 3.30 €).