AstralPool Oxy-Active Liquid

Manuals

AstralPool Oxy-Active Liquid technical sheet 
AstralPool swimming pool care guide

AstralPool Oxy-Active Liquid

AstralPool Oxy-Active Liquid is a complete liquid combination product based on active oxygen that disinfects the private pool without chlorine while keeping it free of algae and turbidity. Manual or automatic dosing by means of a dosing pump. It can also be used as a complement to ozone, ultra-violet, etc. treatments.

Properties

• Appearance: Liquid
• Color: Colorless
• pH (concentrated at 20°C): 2,5 - 4,5
• Density 20°C: 1.08 - 1.12 g/cm 3

Dosage and method of use

OXY ACTIVE LIQUID should always be added by means of a dosing pump.

Initial Treatment: With the water just introduced into the pool, add 1 Lt of OXY ACTIVE LIQUID for every 10 m 3 of water. After 1 hour, adjust the pH of the water between 7.2 and 7.6 using a solid pH Minorador or solid pH increaser.

Maintenance treatment: With the pH of the water adjusted, add the necessary amount of product to maintain an oxygenated water residual of 20 ppm.

For joint treatments with ozone, this dosage can be reduced to maintain a residual of 2 ppm of product.

These doses are for guidance only and can be modified according to the characteristics of each pool, climate, etc.

The initial treatment should be repeated whenever there is a lack of transparency in the water or if algae appear on the walls. If a chlorine treatment is necessary, first let the level of OXY ACTIVE LIQUID drop to zero.

In case of using water with dissolved metals (copper, iron, ...) dose Anticalcareo Super before the first addition of OXY ACTIVE LIQUID.

Available in 5 liter and 30 liter containers.

SKU Referenced:

• 18714
• 18715