Multi-action tablets 500g CTX-392

Manuals

Swimming pool maintenance manual
Product data sheet
Product safety data sheet

Multiaction CTX-392

Multiaction solid tablets of 500 grs, which with its single application in the pool water is able to eliminate bacteria, viruses and microorganisms in general, prevent the development of algae and keep the water clear and crystal clear.

It has a long duration in order not to worry for a long time about the disinfection of the swimming pool and at the same time it offers in only one product, the action of the chlorinated disinfectant, a flocculant action, and also the algaecide action.

It also has a stabilizing action of the disinfectant against UV radiation.

Ideal for: Swimming pools built with ceramic materials of large dimensions or those that cannot be treated for long periods of time.

Dosage and mode of use

Add 15 grams of Dichloro Granulado CTX-200/Gr ClorShock 55% per m3 of water.

After 2 hours, adjust the pH of the water to between 7.2-7.6 using CTX-10 pH- or CTX-20 pH+ solid pH increaser.

Once the pH of the water is adjusted, add 1 tablet of CTX-392 MultiAction 500gr. per 50m3 of water every 7 to 10 days.

These doses are for guidance only and can be modified depending on the characteristics of each pool, climate, etc.

The initial treatment (Superchlorination) should be repeated whenever a lack of transparency in the water is observed.

Introduce the necessary dose of CTX-392 MultiAction 500gr. product inside the skimmers, then turn on the filtration equipment, so that the product can be dissolved as the water circulates through the skimmers.

It is essential that the entire volume of water in the pool is recirculated through the filtering equipment on a daily basis.

The free residual chlorine should be between 0.5 and 2 mg/l, a value that can be easily measured using a chlorine and pH analyzer kit.